I used to make hair ties out of Loom Loops when I was younger, and I saw this post on Pinterest that uses yarn instead of loops. I decided to try it out, but I did a couple things differently.
The original post says to hold the yarn tightly in your hand, but I decided to start with a loop like how I would start to crochet. Then I put the loop over my index finger, and started weaving the yarn over my fingers.When you have two full rows of weaving, take the bottom row and pull it over the end of each finger. This is another thing I did differently from the original post. I thought it was much easier to work toward the palm of my hand rather than toward the back of my hand.Weave a new row on top of the remaining loops on your fingers. The old row is now the bottom row. Continue weaving until you reach the desired length.If you want to make a circle, use the loops from the beginning of your project as a new row. Be sure to keep everything from twisting as you do this. Again, this is a different method from what others might prefer. The tying off method in the original post might be more secure, but I think this looks nicer.After you pull the bottom loops over the top loops, there will be one loop left on each finger. Carefully take the loops from your pinky and ring finger and tie them with a double knot. Then tie the loops from your index and middle finger.I made mine like a hair tie. I think you could make a cool scarf with these if you braided several long ones together and left them straight instead of tying them in circles.Happy National Craft Month!
For National Craft Month, I’m revisiting crafts that inspired me as a child. When I was in elementary school I made this “basket” out of a butter tub and yarn scraps. Materials
Butter Tub (empty and clean)
Start with a plastic tub like butter or margarine comes in. I used a small one that had held almond paste. Make sure to wash it very well to remove any food residue. Make evenly spaced cuts down the sides of the tub. It is very important to cut an odd number of sections, or your weaving will not alternate properly. Do not pull the yarn too tightly. The original basket I made years ago is lopsided because I pulled it too hard as I wove in and out.
Do not pull the yarn this tight.
Starting at the bottom, weave scraps of yarn over and behind the sections. It won’t look perfect in the beginning, but it will straighten itself out a bit as you continue. When you reach the end of the yarn scrap, or you would like to switch to a new color, knot the new yarn to the old one so that the knot is on the inside of the basket. I decided to use only green yarn because St. Patrick’s Day is coming up. Depending on the yarn you use, this could be cute way to make Easter Baskets. At the top of my basket, I used some green eyelash yarn that I’ve had for a long time. Eyelash yarn is easier to work with when you use it with regular worsted yarn. I used it with green yarn, but if you use it alone, it is fluffier.What’s Next?
March is National Craft Month, all month! More easy crafts for kids or adults!
March is National Craft Month!
Perler Bead Tray
Perler Bead Paper
Hot Glue Gun
Choose a pattern if you like, or make up your own as you go. I used this pattern, which is 34×34. By dividing the pattern into quarters, each coaster will be 17×17. Start placing the beads along an edge of the tray, then work each different shape. This is easier than placing beads row by row.
After you have placed all the beads, make sure you like the design before moving ahead. I changed the colors on mine several times before I was happy.Using the paper that came with the perler beads, iron the beads on a medium setting. Leaving the beads on the tray, place the paper on top, then iron using light and even pressure. You should be able to see the beads through the paper, and judge how much you have fused them together. After the beads have cooled, peel off the paper. Flip the coaster and iron the other side. This will make the coaster more durable and help make sure all the beads are well fused.
Lay out the coasters to determine which side is the “up” side. Mark the up side with post-its.
Cut a piece of felt the same size as the coaster.
Using a hot glue gun, glue the felt to the bottom of the coaster. Start with just one edge. If you try to spread glue over the entire coaster and then place the felt, the glue will cool before it attaches the felt.
Continue gluing the felt a small amount at a time until the entire piece of felt is attached. Trim any excess edges from the felt, and you’re finished!
Use up scraps of yarn by making a basket!